- Power: 2 x 10W
- Control: Hand Control
- Colour Temperature: 3200K / 5600K
- Lighting Output: >600lux/1.2m
- Beam Angle: 60°
- Brightness Adjustment:0-100% Dimmer
- LED light life: 50,000 hours
- Input Voltage:6V-17V DC
- Interface Type:Battery Pack Of Sony F970-F770 Or B-Type Power Plug
- Max Brightness Usage Time: 300min (NP-F970)
- Dimensions: 143mm × 160mm × 55mm
- Weight: 400g (only the light)
Socanland LED Camera Kit
This is a bi-colour on-camera LED light with a full metal frame. It is extremely durable. It won’t break like most plastic lights out there. There is a colour temperature knob to select from 3200k or 5700k allowing you to change colour temperature electronically rather than through filters. It is extremely bright with 277 LED’s and 2 x 10W.
This fixture can vary the mix between tungsten and daylight LEDs to set the resulting colour temperature to any point between 3200K and 5600K by hand or by DMX. The LED Digital light is the new invention designed by Socanland. The digital system is used to replace the knob control as usual. The adjustment of both the colour temperature and dimmer can be showed via digits. The power supply mounting plate is fixed on the back of the light.
The 1 x 1 Bi-Colour Panel light is a soft, high output light that allows you to quickly adjust colour temperature instantly so you can adapt to different shooting conditions and skin tones on the fly. The Bi-Colour Panel Light also incorporates a full-range dimmer; remains cool to the touch and can operate on either on AC or an optional Snap-on battery. The 1 x 1 Bi-Colour is the first professional light to utilize both 3200K and 5600K LEDs in a single housing. This revolutionary new concept in lighting puts virtually unlimited colour control right at your fingertips. To further expand the 1×1 Bi-Colour’s flexibility, the fixtures can vary the mix between tungsten and daylight LEDs to set the resulting colour temperature to any point between 3200K and 5600K. Colour temperature can be dialled in by using either the on-board dial or digital colour temperature settings, or via a DMX lighting controller. Thus the Bi-Colour user can make quick adjustments to match unusual mixes of colour temperature, or to enhance skin tones. Less than 10 percent of the electricity needed to power standard lighting fixtures.
Introducing the latest in Flo technology, the LED Flo. The LED Flo 2 bank 4 ft unit is brighter than its industry equivalents, and completely dimmable. The LED Flo 2 bank 4 ft, comes with a fiber housing containing connector clamps for two 5600 Daylight /3200 Tungsten 4′ tubes at 80 Watts total (40w x 2) w/ input voltage either 220, drawing 0.4 amp on 220v. The inline switch in the power cable has a dimmer and can switch to either two or four tube illumination. A metal plate adapter is included with a grip stand connector system at the rear of the fixture. It can be ordered with 3200 or 5600 Kelvin LED tubes as well.
Available in Daylight (flood and spot) and Tungsten (flood) models, the powerful Lightpanel mini system provides soft, directional output. This broad lighting source is ideal to mount on a camera, wall, or any place that calls for a highly portable softlight. Litepanels Mini heads feature an output control knob for instant dimming from 100% to 0, with minimal colour shift. Output is fully flicker-free and heat-free, and remains consistent, even as the battery voltage goes down. For additional control, units are available with pre-cut interchangeable conversion and diffusion gels that handily slip into an integral frame.