FILMGEAR 18000K Daylight
17

FILMGEAR 18000K Daylight

Our most powerful lights in the HMI range are the 18Ks as made by ARRI, Filmgear, Desisti & CMC (Silver Bullet). You may choose to use either 18kW for maximum output or 12kW for normal usage. The 18/12kW Super Silver Bullet is the lightest HMI lighting fixture in the business. Solidly constructed and dependable in either type of operation, it features the new spring action shock mount socket assembly. The newest and largest addition to the ARRI Daylight range, the 18kW, can be used as an alternative 12kW Cinepar with superior light output and distribution

Show and Entertainment Lights

Sort By
Show
  • 4K Search Light Trailer

    • 4kw Single-Ended HMI Lamp
    • 32 Amp, 3 Phase DB Board and Input
    • Automated Movement
    • Single Axle Trailer
  • Colourblast Powercore 12

    The ColorBlast 12 Powercore offers versatile aesthetics, ease-of-control, and compact, rugged nature in a complete line voltage system which integrates power and data management directly within the fixture. It is designed for the generation of rich, saturated colour and colour changing effects in wall-washing, grazing, spot lighting, and large alcove lighting. Accepts a universal power input range from 100 to 240VAC, 350° locking pan and tilt mounting base with a safety tether point. Receives data via Colour Kinetics Data Enabler, a data formatting device that accepts DMX or Ethernet protocol.

  • HTI Follow Spot – 2500W

    The 2500w HTI is a medium-long range followspot, in die-cast and extruded aluminium, for use in TV studios, theatres, concert halls and tours. It is supplied complete with dimmer/black-out, shutter blades, iris diaphragm, separate ballast and mains cable. Colour changer and tripod stands are available as accessories.

  • LED RGB Tubes

    LED DMX Tube is an advanced tube design and the latest version of the LED tube. The LED DMX tube is a graphics and colour changing grade tube that can be set to 1, 2, 4, 8, and 16 pixels per tube. LED DMX tubes come in half and one meter versions. The LED DMX tube uses the very latest in high quality (RGB) LED’s to provide high luminosity even and consistent colours. The LED DMX tube can be directly controlled by DMX-512, PC graphics control or a stand-alone graphics playback system.

  • LED Wall Washers

    The LED Wall Washer is an energy saving, RGB LED based, wash fixture. Incorporating 36 RGB Power LEDs the LED Wall Washer produces full colour 16.7M true 24 Bit colour changing effects for architectural and decorative illumination. LED Wall Washer can be operated standalone, master slave with built in pre-programmed effects or directly with and standard DMX-512 controller. The LED Wall Washer is engineered with push button waterproof external LED display based user interface for setting the mode of operation or DMX Address. The LED Wall Washer used only 3 Channels of DMX to enable external programming of linear colour changing, step based scenes as desired by the lighting designer. You can also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-AI-100. The LED Wall Washer housing is composed of Aluminium Die Cast fixture housing, heat treated glass aperture plate, rated at IP65.

  • Light Processor Q Buffer

    The Q Buffer is probably the most state-of-the-art serial data distributor available. The unit provides a full 1kV isolation between the input and each of the four outputs. Each output section is fitted with both 3-pin and 5-pin XLR’s. All of the eight output lines are fitted with signal status indicators which will highlight a line fault at a glance. An M10 securing bolt is incorporated for attaching a hook clamp, as well as a steel loop for securing a safety chain. A through line output is provided which may be terminated at the press of a button, should the unit be the last connection in the chain.

  • Pin Spots

    The PAR 36 is a projector for PAR 36 lamp, with a 30W 6V transformer, with single body and polish finishing. The projector is cabled with a PVC cable 3 x 0, 75 mm2, Fork terminals, Fuse accessible from outside. Lamp holder spring held by a special keying.

  • PX094 Promixa DMX Splitter

    Using the PX094 Splitter, it is possible to split the input DMX signal into 6 independent control branches. Particular output routes are separated and appropriately strengthened, which guarantees proper operation of the entire installation. Certainly, connection of the receivers to particular output routes must be performed according to the principle of the series chain with a terminator at the end. Installation of the Splitter is limited to power connection and attachment of the DMX signal cables. After turning on the device, the input DMX signal is safely multiplied to 6 outputs. Optically isolated DMX input. Each of 6 outputs is optically isolated. LED on front is ON, when DMX signal is valid. Manufactured in two versions: 3- and 5-pin XLR.

  • Sony KLV 32” LCD Screen

    This Bravia LCD TV has a screen size of 32 inches. It has a viewing angle of 176 degrees (right/left/up/down). The Advanced Contrast Enhancer (ACE) and Bravia Engine 3 technologies in this television, enhances the contrast and colour detail of images, resulting in an optimum viewing experience. The other display features in this television including Digital Noise Reduction, 3D Comb Filter and MPEG Noise Reduction eliminate excess digital noise in images to deliver blur-free picture quality.

  • Sony KLV 40” LCD Screen

    The big picture never looked slimmer boasting a revolutionary design, this super-slim display measures 9.9mm thin and weighs about 12kg. Packed with features, this LCD monitor comes with advanced colour reproduction technologies such as 10-bit processing and a 10-bit panel for smoother colour transitions, plus a Bravia Engine 2 fully digital video processor. In addition to a wide colour gamut LED that delivers exceptional colour reproduction and detailed contrast, the KLV has Motion flow 120Hz technology for exceptional clarity and resolution when viewing.

  • Spectra SCT5/SL72 LED Bar

    The SpectraLed72 LED high power ramps are equipped with special RGBAW LEDs. In the technical realisation of the LED ramps, great importance was attached to the requirements for professional applications in theatres, operas and television. 72 x 1W high power LEDs make this ramp a most powerful system with the smallest possible measurements. Selected LEDs in the colours green, blue, red, amber and white produce every nuance from saturated colours to pastels and cosmetic colours. A further advantage is the perfect reproduction of white light between 2800K – 5600K. Changeable lens modules in 10°, 25° und 50° and a filter frame adapter allow ideal adjustment of light dispersion.

  • Strobe Light

    Strobe lights are used in Television and Theatrical lighting to give an illusion of slow motion. A strobe light flashing at the proper period can appear to freeze or reverse cyclical motion. A typical commercial strobe light has a flash energy in the region of 10 to 150 joules, and discharge times as short as a few milliseconds, often resulting in a flash power of several kilowatts. Larger strobe lights can be used in continuous€ mode, producing extremely intense illumination. The light source is commonly a xenon flash lamp, which has a complex spectrum and a colour temperature of approximately 5,600 kelvins. To obtain coloured light, coloured gels must be used.

  • Traxon 3/255 RGB LED

    Traxons highly reliable 3/255 Wall Washer is a stylish and compact LED fixture for generating rich wall washing effects. IP66-rated, it is perfectly suitable for all outdoor applications.